Ersa ECOCELL Nozzle Reference: Compatibility and Configuration

The Ersa ECOCELL is the newest selective soldering platform from Ersa, designed for next-generation electronics manufacturing with enhanced flexibility and throughput. This reference guide covers nozzle compatibility, base types, and available configurations for the ECOCELL series.

Key Takeaways

**ECOCELL uses updated solder pot designs** — verify base type before ordering any nozzle

**Both B14.1/B22 and B16.1/B36 configurations may apply** — depending on the specific ECOCELL model

**ECOCELL nozzle compatibility follows Ersa's established standards** — same ID/AD and height system

**Aftermarket compatible nozzles are available** — brand names used only to indicate machine compatibility

**Check with your machine documentation** — ECOCELL model variants may have unique pot specifications

ECOCELL Platform Overview

The ECOCELL represents Ersa's latest platform evolution, incorporating lessons from VERSAFLOW, ECOSELECT, and SMARTFLOW product lines:

FeatureECOCELLPrevious Platforms

|---|---|---|

Solder pot designUpdated for ECOCELLVERSAFLOW/ECOSELECT heritage Nozzle interfaceB14.1/B22 or B16.1/B36Same established system Pump technologyEnhancedImproved over VERSAFLOW Flux integrationAdvanced jet/sprayNext-gen fluxing Cycle timeOptimizedFaster than ECOSELECT

Nozzle Base Type Identification for ECOCELL

Before ordering nozzles for your ECOCELL machine, you must identify the correct base type:

1. **Check your machine documentation** — The manual specifies whether your ECOCELL uses B14.1/B22 or B16.1/B36

2. **Examine the solder pot seating surface** — Physical dimensions differ between base types

3. **Contact the machine supplier** — If documentation is unclear, the supplier can confirm the base type

4. **Send us a photo** — We can verify the base type from a clear image of your solder pot

Remember: B14.1/B22 and B16.1/B36 are NOT interchangeable. Using the wrong base type nozzle results in poor seating and unstable solder flow.

Available Nozzle Configurations

B14.1/B22 Nozzle Options (if applicable)

If your ECOCELL uses B14.1/B22, you have access to 90+ nozzle configurations:

Standard height (H=47) most popular options:

Part NumberID/ADApplication

|---|---|---|

1146093.0/6.0General purpose 1146114.0/8.0Medium pads 1146136.0/10.0Large pads 1186158.0/12.0Wide connectors 11927410.0/14.0Extra-wide

Extended height options:

Part NumberID/ADHeightUse Case

|---|---|---|---|

1309643.0/6.0H=57Thick boards 1894784.0/8.0H=57Thick boards, medium pads 2163473.0/6.0H=75Deep wells 1976654.0/8.0H=90Maximum extension

B16.1/B36 Nozzle Options (if applicable)

If your ECOCELL uses B16.1/B36, 18 nozzle configurations are available:

Part NumberID/ADHeightNotes

|---|---|---|---|

6isk47957020a3.0/6.0H=47Alphanumeric format 6isk47957022a4.0/8.0H=47Alphanumeric format 254218.0/12.0H=47Numeric format 1846784.0/8.0H=75Extended height 1622164.0/8.0H=90Maximum height

ECOCELL Nozzle Setup Considerations

Optimizing for ECOCELL Performance

The ECOCELL platform features enhanced pump technology and flux integration:

1. **Match nozzle ID precisely to pad width** — the enhanced pump creates a more consistent wave, allowing tighter ID selection

2. **Consider flux nozzle compatibility** — ECOCELL's advanced fluxing system may require specific flux nozzle configurations

3. **Test nozzle performance on sample boards** — the ECOCELL's optimized cycle time may benefit from different nozzle sizes than you used on older platforms

ECOCELL Nozzle and Flux Integration

ECOCELL machines feature advanced flux application systems that work in coordination with the solder nozzle:

**Jet flux heads** — Precision flux application targeting specific pads

**Spray flux heads** — Broad area fluxing for multi-point soldering

**Drop flux systems** — Micro-dosing for minimal flux application

Confirm the complete ECOCELL machine configuration before selecting a compatible nozzle.

ECOCELL Nozzle Maintenance

ECOCELL machines operate at higher throughput, requiring attentive nozzle maintenance:

FrequencyActionTools

|---|---|---|

DailyWipe nozzle tips, check waveClean cloth WeeklyFull cleaning with IF930 paste179904/179905 + brushes MonthlyDimension verification, flux system checkCalipers, gauges

Compatibility Note

All nozzles referenced in this guide are aftermarket compatible replacement parts. The Ersa brand name is used only to indicate machine compatibility. These are aftermarket compatible replacement products.

Related Products

[B14.1/B22 Nozzles](/products/b14-1-b22-nozzles) — 90+ configurations

[B16.1/B36 Nozzles](/products/b16-1-b36-nozzles) — 18 configurations

[Nozzle Overview Matrix](/technical-guides/ersa-selective-soldering-nozzle-overview-matrix) — Complete cross-reference

[Part Number Lookup](/part-number-lookup) — Find your nozzle quickly

[Nozzle Catalog](/selective-soldering-nozzle-catalog) — Browse compatible nozzles

Need ECOCELL Nozzle Assistance?

[Contact us](/contact) with your ECOCELL model number for nozzle compatibility verification, or [WhatsApp](https://wa.me/8615706606161) for fast support.