Selective Soldering Nozzle Photo Checklist for Quotation

Getting a fast and accurate quotation for an aftermarket compatible selective soldering nozzle starts with sending the right information. This checklist ensures you include everything needed for your supplier to identify and quote the correct nozzle without back-and-forth delays.

Key Takeaways

**Five essential photos** — top, side, base, close-up of tip, and scale reference

**Three key measurements** — ID, AD, and height if you can measure with calipers

**Machine model and base type** — confirms compatibility with your solder pot

**Quantity and urgency** — helps the supplier provide accurate pricing and lead time

**Clean nozzle before photographing** — oxide and residue obscure critical details

The Complete Photo Checklist

Required Photos

#PhotoWhat It ShowsHow to Take

|---|---|---|---|

1Top view (nozzle tip from above)ID opening size and shapePlace nozzle flat, shoot directly down 2Side profile viewHeight, overall shape, body contourStand nozzle upright on flat surface 3Base bottom viewThread pattern, seating surface, base typeFlip nozzle over, shoot the bottom 4Close-up of nozzle tipID detail, wear condition, tip surfaceUse macro or zoom mode 5Nozzle with ruler/scaleSize reference for dimension estimationPlace metric ruler alongside nozzle

Recommended Additional Photos

#PhotoWhy It Helps

|---|---|---|

6Nozzle seated in solder potConfirms base compatibility 7Nozzle with caliper showing IDPrecise ID measurement 8Nozzle with caliper showing ADPrecise AD measurement 9Nozzle with caliper showing heightPrecise height measurement 10Machine name plateConfirms machine model

Required Information to Include with Photos

Along with your photos, provide the following details to ensure accurate quotation:

Essential Information

FieldExampleWhy Needed

|---|---|---|

Machine brand and model"Ersa VERSAFLOW 3/45"Confirms platform and base type Solder pot base type"B14.1/B22" or "B16.1/B36"Determines nozzle compatibility Part number (if known)"114613" or "unknown"Fastest identification method Quantity needed"2 nozzles"Pricing and lead time Urgency"Standard" or "Rush"Affects lead time and shipping

Helpful Additional Information

FieldExampleWhy Helpful

|---|---|---|

Solder alloy type"Sn96.5/Ag3.0/Cu0.5 (SAC305)"Temperature and wear considerations Application description"Through-hole connector on 1.6mm PCB"Helps verify nozzle ID/AD selection Previous nozzle performance"3.0/6.0 worked well but wore quickly"Guides material recommendations Current solder pot temperature"260°C"Affects nozzle material selection

Photo Quality Guidelines

Ersa, VERSAFLOW, ECOSELECT, SMARTFLOW and other brand names are used for compatibility reference only. Our aftermarket compatible nozzles are manufactured to match these specifications.

Minimum Photo Requirements

RequirementStandardWhy

|---|---|---|

Resolution1080x1080 minimumSmall details like ID opening must be visible LightingBright, even, no shadowsDetails must be clearly visible BackgroundPlain, light-coloredNozzle stands out clearly FocusSharp on nozzle detailsID opening and base thread must be crisp ScaleRuler or caliper visibleDimensions can be estimated

Common Photo Quality Issues

IssueImpactFix

|---|---|---|

Blurry photoCannot identify dimensionsUse steady hand or tripod Dark/shadowedHidden detailsAdd direct lighting Cluttered backgroundConfusing visualUse plain white surface No scale referenceDimensions unknownInclude ruler in frame Only one angleBase type unconfirmedSend minimum 3 angles Low resolutionSmall features invisibleUse highest camera resolution

Preparing the Nozzle for Photos

Before photographing, clean the nozzle to reveal its true dimensions and surface condition:

1. **Remove solder residue** — Wipe with a dry cloth or paper towel

2. **Remove oxide layer** — Light cleaning with IF930 paste if heavily oxidized

3. **Dry thoroughly** — No moisture on surfaces

4. **Handle carefully** — Avoid scratching or damaging the tip

See our [Nozzle Cleaning Guide](/technical-guides/how-to-clean-wettable-selective-soldering-nozzles) for detailed cleaning procedures.

Submission Checklist Summary

Before sending your quotation request, verify:

[ ] At least 3 photos from different angles (top, side, base)

[ ] Scale reference included in at least one photo

[ ] Nozzle cleaned before photographing

[ ] Machine model identified

[ ] Base type specified (B14.1/B22, B16.1/B36, or other)

[ ] Quantity needed stated

[ ] Part number provided if available

[ ] Any known measurements included

[ ] Application description included

Submission Methods

MethodResponse TimeBest For

|---|---|---|

WhatsAppAs soon as practicableRush orders, quick identification Online formAs soon as practicableStandard orders, multiple nozzles EmailAs soon as practicableDetailed specifications, drawings attached

Related Products

[B14.1/B22 Nozzles](/products/b14-1-b22-nozzles) — 90+ aftermarket compatible configurations

[B16.1/B36 Nozzles](/products/b16-1-b36-nozzles) — 18 aftermarket compatible configurations

[Custom Nozzles](/technical-guides/custom-selective-soldering-nozzles-by-drawing-or-sample) — When standard sizes do not match

[Nozzle Maintenance Guide](/technical-guides/how-to-clean-wettable-selective-soldering-nozzles) — Prepare nozzles for photos

Ready to Request Your Quotation?

[WhatsApp us](https://wa.me/8615706606161) your photos and information for the fastest response, or [Request a Quote](/contact) through our online form.